Scrubs
4 years ago
I shall be able to make most of the new part designs before I actually buy this set later this year. I have most of them in sets from last year that I did not open yet.
Drag & Drop
*.jpg or *.png
or browser file
Images posted in this section must comply with the Mecabricks rules. Please read carefully the rules before publishing.
No renderings uploaded yet
2.7k
33
Express review : WOAH !
I'd greatly appreciate a review (or even several), feel free to notice me with mistakes !
I'd greatly appreciate a review (or even several), feel free to notice me with mistakes !
34 comments
Post comment
Scrubs
4 years ago
I just added 18943. At least, the overall look will feel more complete. It annoyed me that there was the missing roof in the middle
MalMan35
4 years ago
AWESOME. To high out of my budget though
mathieub
4 years ago
Update with 18943 - Technic Digger Bucket 5 x 7 x 4 1/2 Clamshell with Pin Hole and Axle Hole added at light speed by Scrubs !
Scrubs
4 years ago
Now we are talking! Now that it looks mostly complete I might not do the other pieces as quick but they will come at some stage anyway
mathieub
4 years ago
In my opinion the 2 "most needed" would be the angled door 28327 and the new slope thing 28192. I stay tunned
Masman8675
4 years ago
Great job mathieub!
Scrubs
4 years ago
28327 it will be more complicated to get hold of it. For 28192, it is already done.
mathieub
4 years ago
Updated with 28192 (they are inside the dentist office and music shop)
mathieub
4 years ago
Updated with 24482 - Minifig, Weapon Spear Tip with Fins (Blade #9)
mathieub
4 years ago
Updated with Mini Upper Part No.3490 (MF upper part For chef in bakery)
mathieub
4 years ago
Updated with 3 new minifig parts added by wlange, thanks to him !
The dentist now has his upper part 3708 (2nd floor, in his office), and the barista in the first floor bar has her lower part No 900 and her upper part 3083.
The dentist now has his upper part 3708 (2nd floor, in his office), and the barista in the first floor bar has her lower part No 900 and her upper part 3083.
David184
4 years ago
This looks awesome!
mathieub
4 years ago
Updated with 28327 - Door Frame 4 x 4 x 6 Corner
mathieub
3 years ago
Updated with :
- Welders Torch W. Ø3.2 Shaft (13793)
- Fence 4X4X2 (21229)
- Welders Torch W. Ø3.2 Shaft (13793)
- Fence 4X4X2 (21229)
Scrubs
3 years ago
You also have proper 19798 instead of 3940.
I am building the real set so I will update the rest of it.
You can push the transparent yellow parts all the way on 13793.
I am building the real set so I will update the rest of it.
You can push the transparent yellow parts all the way on 13793.
mathieub
3 years ago
Hi Scrubs, I just updated according to your last comment.
Scrubs
3 years ago
Just spotted something wrong with the café sign. you have 2 yellow hooks 11090 that shall not be here
I also drew 3069d202 and 25269d3 that are part of this set.
I also drew 3069d202 and 25269d3 that are part of this set.
Scrubs
3 years ago
The 1X1 round plates under the two lamps in the café shall be transparent orange.
mathieub
3 years ago
I also added :
- 25269pb001 - Tile, Round 1 x 1 Quarter with Lattice Pie Pattern : http://www.bricklink.com/v2/catalog/catalogitem.page?P=25269pb001&idColor=2
- 3069bpb382 - Tile 1 x 2 with Lighthouse, Sailboat and 'I Heart HLC' Pattern : http://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb382&idColor=1
- 25269pb001 - Tile, Round 1 x 1 Quarter with Lattice Pie Pattern : http://www.bricklink.com/v2/catalog/catalogitem.page?P=25269pb001&idColor=2
- 3069bpb382 - Tile 1 x 2 with Lighthouse, Sailboat and 'I Heart HLC' Pattern : http://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb382&idColor=1
mathieub
3 years ago
I corrected the lamps and café sign
mathieub
3 years ago
Updated with new part 11640 - Minifig, Utensil Guitar Electric
Scrubs
3 years ago
Noticed that 20193d1 is the wrong way round.
mathieub
3 years ago
Updated with :
- Flat Tile 1X1, Round No.50
- Flat Tile 2X3 No.2
and corrected the errors reported by scrubs
- Flat Tile 1X1, Round No.50
- Flat Tile 2X3 No.2
and corrected the errors reported by scrubs
mathieub
3 years ago
updated with 13808 - saxophone. I added the decorationless one, please let me know if I was right
Scrubs
3 years ago
That is the correct one.
2 more to go. The new parrot and the mini wig. Not the easiest though.
2 more to go. The new parrot and the mini wig. Not the easiest though.
Renderbricks
3 years ago
Just select the groups except the one you want to export with CTRL and hide them till you have exported all of them.
Renderbricks
3 years ago
I'll sent SCRUBS a message that we need an additional export feature to export by groups. It makes sense to organize complex scenes or models by groups in Mecabricks to have the same groups in Blender with one click. Very useful.
Renderbricks
3 years ago
Do some tests with defocus (Depth Of Field).
Scrubs
3 years ago
Added the bird 27062d1
mathieub
3 years ago
Thanks Scrubs, I updated the model
Scrubs
3 years ago
And wig 27186 as well. I think everything is here now!
mathieub
3 years ago
Updated again According to my notes the model should be complete !
Stephan3321
2 years ago
Updated with 35336.