5 Posts
Hello there

I'm just trying mecabricks, it looks great!
Is it possible to request some missing parts ?

If it is, i'd like to have parts:

4859 Wedge, Plate 3 x 4 without Stud Notches
64225 Wedge 4 x 3 No Studs

These are two relatively common parts so they'll be useful for others too.
10 Nov 2014, 13:49
49 Posts
I've modeled 4859 and sent Mecabricks an email, I'm sure the part will be added soon. I'll begin modeling 64225.
10 Nov 2014, 17:11
3078 Posts

Yes of course
It will be added today.
10 Nov 2014, 19:20
3078 Posts
So part 4859 is now in the database.
11 Nov 2014, 10:33
49 Posts
I've got part 64225 just about modeled. I've been studying for tests in Circuits and Physics II, so haven't gotten a chance to finish it up. I should be able to wrap it up in about two days. If someone finishes it before me, that is fine.

The Peeron file looked fine, it was just extremely rough, or else I would have suggested that one.
13 Nov 2014, 01:15
3078 Posts
Both parts are now in the library.
16 Nov 2014, 20:00
2 Posts

I just discovered Mecabricks yesterday, and I find it really great !
I would like to request several parts, in order to recreate my all-time masterpiece :

30184 - Trailer Base 6 x 26 x 2 & 2/3, from 5975 T-Rex Transport
30118 - Wing 8 x 4 - 2 x 3 & 1/3 Up, from 6829 Radon Rover
30119 - Wing 8 x 4 - 2 x 3 & 1/3 Down, from 6979 Interstellar Starfighter
2952 - Propellor 2 Blade 9 Diameter, from 6473 Res-Q Cruiser
6016 - Bar 1 x 4 x 3 Window, from 6348 Surveillance Squad
30382 - Wedge 2 x 12 Triple, from 7111 Droid Fighter
30359a - Bar 1 x 8 with Brick 1 x 2 Curved Top End without Axlehole, from 7128 Speeder Bikes

Not the most common parts, I'm afraid. But I can make something really cool with them

Thanks !
17 Nov 2014, 19:44
3078 Posts
Hello and welcome!

I will have a look into that and let you know when I add them to the library. Even if they are not too common I shall be able to find enough information to make them.
17 Nov 2014, 21:20
49 Posts
While 30359a is being modeled, 30359b should be modeled as well.
18 Nov 2014, 01:42
3078 Posts
Yes, I think this is the one missing for your model Anakin's Pod Racer
18 Nov 2014, 02:41
Edited 18 Nov 2014, 02:42
3078 Posts
I started tonight to look at the parts and I already added 30118.
19 Nov 2014, 11:21
5 Posts
thanks for the part i requested!
20 Nov 2014, 13:35
3078 Posts
Parts 6016 & 2952 have been added.
21 Nov 2014, 04:32
3078 Posts

I added today the following parts that you requested:
- 30119
- 30382
- 30359a
- 30359b

The only missing one is 30184. However, I don't have this brick and I can find any information to help me model it. It's not in Ldraw or LDD.
23 Nov 2014, 03:26
49 Posts
I can take a crack at 30184, it doesn't seem too difficult to model. The biggest problem will be the bottom, since the only thing I could find was on low resolution image. Peeron doesn't even have the file.

Ponc, if you take some pictures and upload them to imgur, I'm sure someone can model them quite easily for you. Top, bottom, sides, and at different angles would be helpful.
24 Nov 2014, 15:26
2 Posts
Thanks a lot for all the parts.

Concerning 30184, I actually figured out a way to somehow replicate it with standard bricks.
@d.schultz : in case you want to create it anyway, I don't have this part at disposal right now, it's stored at my parents house, but I should be able to provide you with pictures when I get there for Christmas.
8 Dec 2014, 09:08
3078 Posts

Yep, It would be great
We will model it if you can provide a few detailed photos.
8 Dec 2014, 09:13
49 Posts
Scrubs is right, photos would be best. I've seen a few pictures of the part modeled with bricks, but there's quit a few things amiss. You can always build the part with bricks in the workshop, save it as a group, then when the part is modeled you can easily delete the group and replace it with the part.

I've been at the tail end of the current semester at school since my last post, which ends next week. I'll get a drawing roughed out next week after finals in anticipation for some detailed photos.
11 Dec 2014, 04:16
6 Posts
14 Dec 2014, 07:21
Edited 14 Dec 2014, 07:22
3078 Posts

I shall be able to make most of them. For the part 43903, it would require quite a lot of work as it would be a new type of flexible part which is not implemented yet. So for this one it won't happen too soon and def not before the end of the year especially with xmas coming. For the others, probably in the next few days
14 Dec 2014, 10:27
Page 1 of 3